Heavyweight Gearboxes 8:1

[teamstorm]

Having changed the gear ratio in Storm II, we have 2 Heavyweight gearboxes for sale manufactured by Mike Lambert from Dantomkia (they are very very well made). They are a solid (closed) aluminium shell with the gears fully contained inside and a recessed pocket for the front face of the Magmotor to slot into. Easily taken apart with 6 socket cap screws.

Designed for the S28-400 Magmotor/Ampflow motor, and with an 8:1 gear ratio, so on a 6" wheel at 24v that's 11mph - perfect heavyweight territory. Output is a 120mm (ish) long 20mm diameter keyed shaft. The gearboxes themselves are circa 135mm x 60mm x 130mm in size and have mounting mounts that key around 25mm square box section and just bolt on.

Cost new over £1000 for them, no expense spared in manufacture, looking for offers over £300 which is less than what the custom EN24T gears cost alone - just want to see someone using these great gearboxes !

[teamstorm]

I already have someone on 'first refusal' for these, but in case they don't choose to take them - pictures linked below.

https://www.dropbox.com/sh/y5gvz0lru...Xs1i_FEba?dl=0

[teamstorm]

Still not sold - BUMP. Perfect for someone building something in a hurry !

[jay]

Are these still up for grabs? Do you have pictures?

[teamstorm]

Yes they are still for sale (funnily enough there's suddenly a lot of interest in two pre-made gearboxes) - however for some reason the dropbox link isn't working. I'm away this week but will see if I can get picture(s) of them for you in the next day or so.

[teamstorm]

Really pleased to say these are SOLD, and to a University/Educational team which is even better !