Register To Comment
Results 1 to 4 of 4

Thread: Dimensions

  1. #1
    What are the normal range of dimensions for a beetle weight bot as in height, width and depth, obviously ground clearance should be as close to zero as possible sorry for this strange question but I have only just decided to make a beetle weight so no nothing at this point. Thanks for your help

  2. #2
    I think the dimensions are usually under 10cm, 30cm, 30cm(H, W, L). The robot I'm building is 6cm high, 30cm wide and 30cm long.

  3. #3
    Member

    Status
    Offline
    Name
    Danny
    Robots
    Bounce - Antweight flipper
    Location
    Skane, Sweden
    Posts
    544
    my beetlee will be about 4cm x 23cm x23cm

  4. #4
    Roboteer

    Status
    Offline
    Name
    N/A
    Robots
    The Unnamed, Bourbon, Deadlock
    Location
    UK
    Posts
    136
    My (secret) beetleweight is:
    145mm front to back
    197mm side to side
    35mm wheel height, also the majority of the body, but 68mm at the peak.
    My ground clearance is 2mm but I don't know if that is enough or too much.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •