Help with choosing parts for a first robot, please.

[Coolspeedbot]

Just realised that it's been nearly a year since my last post on this thread, so I thought I'd make an update. Progress has generally been very stop/start as I live in halls of residence at University, so unfortunately I can't really work on the robot during semester time.

13479477_10205039041856060_323680255_n.jpg ACTUAL VENATOR INSIDES OH MY GOSH.jpg ACTUAL VENATOR OH MY GOSH.jpg

Although Venator isn't quite up and running yet it actually looks like a combat robot now! That's pretty much everything except the battery, steel wedges, power LED and mountings. I also really annoyingly blew something up in one of my ESCs about a month ago so I'll need to do something about that too.

But considering I knew next to nothing about electronics or D.I.Y. before starting this project I'm really happy with how this has turned out so far. (Just pretend those misaligned holes on the lid aren't there.) Hopefully it will actually work when I finally get to turn the thing on!

How did you fix the side panels to the center frame? (those blocks between the front and back wheels)

[dotDominic]

Thanks, Andy.

@CoolSpeedBot There's a 100 mm bolt which goes through the length of the block, with a barrel nut in the middle. Then there's a hole in the side of the inner bulkhead which allows it to be held in with a washer and nut. Here's a photo of one that was a bit iffy, hope it makes sense.

IMG_3663.jpg


Right now it's the only thing that's holding the wedge and outer armour to inside - now I can see where the wedge actually sits I can bolt it to the inner bulkheads.

[Coolspeedbot]

Thanks, Andy.

@CoolSpeedBot There's a 100 mm bolt which goes through the length of the block, with a barrel nut in the middle. Then there's a hole in the side of the inner bulkhead which allows it to be held in with a washer and nut. Here's a photo of one that was a bit iffy, hope it makes sense.

IMG_3663.jpg


Right now it's the only thing that's holding the wedge and outer armour to inside - now I can see where the wedge actually sits I can bolt it to the inner bulkheads.

I see, thanks