Hello, just starting to sort out the wiring and stuff, and I was just wondering what would be an appropriate rated fuse for this LiPo battery, please:
http://www.hobbyking.co.uk/hobbyking...mah%204s%2030c

I've read that the fuse has to rated lower than the maximum current draw of the battery, but how much lower is necessary? I obviously don't want the fuse to be rated too low.

Also read that using Maxi fuses with the holder from technobotsonline can also be the removable link. Is that reasonably straight forward to set up? I've also noticed that the wire in the holder uses 8 awg wire, whereas the rest of my robot will use 12 awg (with the exception of the battery which uses 10 awg.) Does mixing wire ratings cause any problems or is it ok?

Not started building much yet but I pretty much have everything except a few bits and pieces, so hopefully progress should speed up soon!

Thanks!