Register To Comment
Results 1 to 7 of 7

Thread: Team Hydra Sale

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    OK, been clearing out the shed today. re-evaluating what we're going to do and how we're going to get there. As with most who've been doing this a while we've accumulated masses of stuff which now needs to go.

    I'll list stuff as we get to it /take it apart/fix it so it works etc. but here's the first lot.

    1. Robot Chasis - Comes from a robot we ran once at Aylesbury called Fireman Sam. It shattered the worm drive axe mech we'd stuck together and never ran again. Before this it was a mini firestorm. It's got a 6mm thick ali base and bulkheads designed to fit the Bosch 35W gearboxes listed later. Bulkheads are the same 6mm ali. Body shell is 1.5mm (i think) stainless steel. All needs bolting back in place. - £30

    Attachment 5279Attachment 5280Attachment 5281IMG_0856.jpg

    2. Bosch 35W gear boxes, will fit the chasis above. These have the plastic gears in the so i'd run at 12/14.4V but you can run up to 24V. - £20 each

    IMG_0872.jpg

    3. 200mm x 50mm (200-50) tyres and inner tubes. I think these were Hydras original wheels but I've never had the hubs for them. £10 for all four.

    IMG_0857.jpg

    4. Wound rotors for 750W Bosch motors. These have the shaft ground down to 11mm and have a key way in them to fit a gear box. Windings are good and haven't been used much. Surface rust on ends of shaft but fairly good condition - £30 each

    IMG_0858.jpg

    5. 2 x 24V battle packs. 5 x 4 arrangement. These are old and have been sat in the shed for a long time. Not sure if they charge well, hold their charge or what. So selling as spares as someone will be able to salvage cells if the want them so £10 each.

    IMG_0859.jpg

    More to follow

    Andy

  2. #2
    Some more bits

    6. Two Astroflight 112 Nicad/Nimh chargers. These are fitted with 'Dapters' which can be used for charging LiFe type batteries (not balancing though). Plug in, press a few buttons and away you go.
    http://www.slkelectronics.com/lipodapter/.

    These aren't in good condition. One has a screen which only shows you half the display and the other has a broken nob. They do work and you have enough of the screen to set the current. Anyone like to make me an offer on these.

    Obviously if you take the dapter off they will work as the standard charger.

    Make me an offer if they're any use.

    IMG_0860.jpgIMG_0861.jpgIMG_0862.jpgIMG_0863.jpgIMG_0864.jpgIMG_0865.jpgIMG_0866.jpg

    7. 3no. dapters for allowing nicad chargers to charge a123/life batteries. £10 each

    IMG_0867.jpg

    8. 3no. pro peak supernova chargers 1-25cell nimh/nicad or upt to 12v sla. £15 each

    IMG_0868.jpg

    9. A load of NCC speed controllers. There are 3no 36V NCC 70's and 3no. NCC 120's. The 120's were in Smidsy and working before it got given a Roboteq. The Ncc70's I'm not sure about as they were in hydra and i can't remember why we changed them. Unfortunately i have no way of testing. There's also an Ian Swann processor board.

    Value on this lot not sure (obviously if they aren't working you'll get a refund so no risk really). Make me an offer. I'm fairly convinced i have some team Delta interfaces in the other shed as well and i'll post if i find them.

    IMG_0869.jpg

    10. A pair of Gimson GR02's 18V 24:1 version. These are pretty much brand new. Have been tested and a wheel fixed before deciding not to use them. £30 each.

    IMG_0870.jpg

  3. #3
    11. 2no. Bosch 35W motors - £15 each

    IMG_0871.jpg

    12. 2no BROKEN Team Whyachi gearboxes. Make me an offer. These got overvolted and the gears got mashed up. May be useful for spares. Not the original motors either, currently have an 18V motor on them but fit any drill motor.

    IMG_0873.jpg

    13. 2no 30A Electronise Speed Controllers with external relays. Currently have BOOM's wiring loom attached so you could just connect up a battery, some motors, receiver etc and you'd be away. £30 each

    IMG_0874.jpg

    14. 3no 12V racing packs. There are 3300mah and 3700mah versions. No connectors. - £10each

    IMG_0875.jpg

  4. #4
    PM Sent

  5. #5

  6. #6

  7. #7

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •