bonecrusher- the first bw from Suvv Industries Robotics devision

[suvv]

meet wonky i cobbled together in 2 days out of offcuts of hdpe and polly i had kicking about in the scrap pile gona get a nice peice of titanium to make a blade for hte front and then watch it get dismantled by the first spinner it fights the second pic is an attempt to show ware the esc decided to eject lots of smoke but i dont think it came out to well on cam


11198562_1599882346918011_66907442_n.jpg 11198857_1599882333584679_795575892_n.jpg

[suvv]

and im only guessing at the short it was smoking like it was about to explode

[Niels - Team K.a.L.M.]

I use these for testing, the plastic can be be slid on and off the clamps.
But they should only be used if the machine stays stationairy.

http://www.ebay.nl/itm/10-Pcs-Colorf...item2a4ee321c0

[suvv]

been a while since i have done anything to this so i thought id bring everyone up to speed

since i last played with anything work descended on my life like the proverbial ton of bricks and i lost a bit of time i then suddenly i had entered a competition and had nothing to fight with so i panicky turned to harry and with his help..and me throwing money at him till i was poor the creature you see in the picture below was created amazingly it all came in weight even with 4 mm steel wedge and bumpers


bone-crusher mk2
11840385_1634938463412399_294882285_o.jpg



iron games scotland:

being my first competition i was decidedly unsure how it was going to go but thankfully everyone was accepting of my nervousness the night before after a simple rewiring screw up i fried the entire wiring set up thankfully the link melted before any damage was done but it did mean that i was going into my first competition having never even tested the thing they let me chuck it in the box for a bit between pay to play fights and i discovered 2 very important things 1. allways check you have tightened the grub screws on your hubs 2. it doesn't handle like anything i have ever driven before...great but i was positive my wedge of doom was ready for anything......

fight 1 eggbeater:

i was nervous and i was drawn against the one bot i was worried about at the comp simply because it was a vertical spinner that i was convinced was going to rip my front wedge clean off thankfully he was having as many issues as i was he couldn't spin up and drive at the same time or at least not very well so my plan was to avoid the front and shove him side on and pit him activate calls out and i charge...and immediately turn left i take it a bit more gentle this time and get proper forward movement however i drive straight into the nasty spinning bar of unpleasantness amazingly the front stays solid on the bot and it does a double back flip and carry's on moving then his bar stops moving so i figure this is my chance i charge in and wedge myself in under the blade stopping hit from spinning however as i try to push him i find myself going backwards making a nasty grinding noise which turned out to be the hubs that had come loose from the motor shafts after some more pushing and some more back flips cease was called and egg beater got it on a judges decision i felt better knowing i could take a pounding but i definitely need to sharpen the wedge so that it gets under people.

fight 2 flatulance:

having tightened the grub screws i was determined to do better however my next fight was against flatulence who after much dancing between us both lifted me up and beached me on my rear bumper the fight was pretty uneventful and once again i had the wonderful noise of hubs spinning on wheels meaning i have no pushing power at all

fight 3 fqhwaghds:

this was more of a dignity saver attempt for me having won nothing so far and surely i couldn't lose to a bunch of cable ties and optimism...oh how wrong was i things started off well i was able to push him about and generally do something i opened the pit thinking i could navigate him round and in my haste to get back into the fight i forgot what my bot does if you give it full throttle...and turned myself directly into the pit

overall it was a good competition and i learnt a great deal including the wonders of loctite and that i need to practice driving this thing watch this space as i will hopefully have the designs up for the mk3 and who knows it might do better than all loses.

suvv

[Flag Captured]

fight 3 fqhwaghds:

this was more of a dignity saver attempt for me having won nothing so far and surely i couldn't lose to a bunch of cable ties and optimism...oh how wrong was i things started off well i was able to push him about and generally do something i opened the pit thinking i could navigate him round and in my haste to get back into the fight i forgot what my bot does if you give it full throttle...and turned myself directly into the pit

Secondary weapon: intimidation and mind control. YOU CAN'T BEAT THE FHQWHGADS.

In all seriousness though, I'd consider that a win by all accounts, you walked all over Fhqwhgads. Was extremely unfortunate you ran into the pit! And, you managed to bust one of my gearboxes further, I'd need to watch the video back of it (anyone have that btw?) but I was immobile on one side I think. Ironically if you'd have left me alone, you'd have taken that!

Great machine though, if you can get the little issues sorted out I can definitely see that being a tough little machine! How much weight did you have left over for improvements?

[RogueTwoRobots]

YOU CAN'T BEAT THE FHQWHGADS.

Unless Fhqwhgads gets hoisted by a certain servo lifter robot, dragged around the arena and dumped in the pit

I think I got all the fights on video so should have Bonecrusher v Fhqwhgads (I'm finally getting the spelling right without having to look at it!) but haven't sorted through my stuff yet. Will get it uploaded if I do.

[daveimi]

You did really well Something that may help like it did me was replace the grub screws with normal screws of the same thread. Then I really managed to tighten them. N as you said threadlock. What electrics does your bot run? Would it be ok to see a pic of the inside?

[suvv]

its 2 40amp botbitz controlers and in my haste to glue the grub screws i may have loctite the entire hub to the motor shaft....it may need combat to shift them off the motors again and i have discovered that the grub screws have fell apart inside so they werent tightening properly once the whole glue thing has decintergrated im goong to drill them out and re tap the threada d try your suggestion

[suvv]

i think i have about 15 grams spare and in traditional robot form now that the competition is over i have got it working much better im going to try to put a bit of a better edge on the wedge and see how it goes and annoyingly my camera decided to not record that one as id like to see the replay on it myself

[Flag Captured]

Which simultaneously broke my gearbox, yes I know

And that'd be awesome if you could do, the crowd reaction was utterly hilarious haha. If you have the aftershow things-running-into-spinners match as well, get that uploaded because that was rather brilliant too!