Thread update:


Jarvis has been helping me plan out what I'll be using, going what I have already. And as many of you have already guessed I have bought two S900s from Niel which will be the source for it's main weapon.... Power!











Drive: 2 x Speed 900s, 6:1 ratio, Banebots 98mm 50 shore wheels running belts for 4WD
Speed Controllers: TZ85s
Battery: 6S 3300mAh Lipo
Weapon: Lifter run off a 50mm stroke Gimson GLA-750S linac with a 6mm Hardox wedge, similar to Tormenta 2s wedge, which can be swapped out for pivoted Hardox forks.
Construction: HDPE: 25mm side armour, 15mm bulkheads in the centre, 12mm lid, base and rear armour.
RC stuff: DX5e and OrangeRX






I would personally prefer the have the 6mm hardox wedge on a 40 degree pivot so when flipped the wedge will still ride along the floor but Jarvis reckons this would make the wedge weak? Is there any way to make it doable?




So if all goes to plan... This should be quite impregnable, if not then I'll go out in style... Ish.


Cheers,
Adam