LYNX Beetleweight

[mrsam]

Right so, Putting the mini hatchet on hold for a while and i'm going to be designing an overhead bar spinner, an extremely stupid overhead spinner i might add. Basically whilst looking through some old bits and bobs i found a whacking great big lawnmower blade that looks perfect, 350mm long, 45mm wide and about 4mm thick weighting roughly 400g. The idea is to have a Hazard/massacre type chassis made from 10mm nylon about 200mm by 180mm and the blade on top sitting about 40-50mm high spinning at roughly 4000rpm. I am under no illusions that this is a good idea and i expect it to send itself flying on more than one occasion but still it should be fun.