The Picnickers - Build Diary(s)

[Tashic]

Cool!
Some one should organize a wooden robot rumble!

[Fathersplat]

Some one should organize a wooden robot rumble!

Could be fun.
Heh, it'd be protective gloves mandatory, nobody wants splinters.

[daveimi]

I have a wooden robot I could bring along

[Mega Masher]

Me too

[Fathersplat]

Dad decided to order a 1300mAh 3S lipo even after I told him I didn't have a proper plan yet, so I guess I'm using that, plus one of these probably:
http://www.hobbyking.com/hobbyking/s...dProduct=31782
http://www.hobbyking.com/hobbyking/s...ess_Motor.html

Will probably be the turnigy. Looking at some 40a escs also.
Will keep you posted on my progress.

[Fathersplat]

The stuff's here:
Includes a 1.3 amp 45-90c nano-tech, a 1400kv 2826 turnigy and a 40a ESC, plus two eBay 1000rpm motors, a sabretooth 2x5 and a dx4 receiver. Please note that the wiring is by no means final, its only a test rig.
No wheels yet, but any recommendations? Looking at either smallest banebots or small foam wheels.

[Niels - Team K.a.L.M.]

I'm now looking at 62mm onroad rc tyres that should arrive in the coming week.

I used 80mm selfmade wheels earlier (70mm hdpe circles with bikethread on it)

In both cases I use these to connect the wheel to the motors:
http://www.ebay.nl/itm/121246368179?...84.m1497.l2649

[plargen]

I use those 12mm hex adapters on my beetles, make sure you locktite the threads or they will fall off lol

[Fathersplat]

Thanks, will take a look.
Different motor now, how do people mount their brushlesses? I see it has something to do with having the shaft at the other side, but that's all I can guess. I've never had a brushless to play with before, as you can tell.

[Fathersplat]

Okay, I admit it. I got lazy. Being involved in a semi-esport for the past two years has eaten a lot of my time away from other hobbies. I still have everything, it is just gathering dust at this point.

After visiting insomnia to meet with a few friends I was told by a good amount of roboteers to get back into this vastly-neglected past time of mine, and I think I agree, I have to do it. I just have to.

Two questions, where can I source machined parts and wheels from for beetle/featherweights, and how much do they typically cost? I'm not confident in my own abilities to search for this stuff as so far I have found no real answers.

Lastly, I haven't been completely idle. I still mess with lego from time to time, these being two recent creations, both kept under 500g in weight:
14011735_1049267021809525_1038060471_n(1).jpg14017659_1050872611648966_987256888_n(1).jpg
They're quite ugly but I was rusty with my building techniques so forgive me.