Boring Brick

[Niels - Team K.a.L.M.]

What you should do:

Power up your transmitter holding the trainer channel, uppermost lever on the left en hold it for the moment.
Power up the robot with the bind plug in the receiver.
After the lights come on pull the bind plug out of the reveiver.
Release the trainer switch.

The receiver will now have memorized the failsafe settings your transmitter was sending at that time.

Before you do all of this make sure all your wheels are stationairy so it will shut down completely once you switch off your transmitter.

I use a dx5e with the 8 channel version receiver you have.