Quote Originally Posted by mrsam View Post
As i'd rather not fail a tech check at an event for something stupid would it be possible for somebody to put up a wiring diagram so i know where to start, it would be for 2 motors, 2 esc's, 2 batteries in parallel, mixer, power light and link. Would be much appreciated.
Considering there is pretty much only one way of hooking it all up to get the machine working you shouldn't have to worry about failing a tech check. Do try to shrinkwrap all your soldered wire connections or solder connectors between your leads.

simply put, connect both plus/positive sides of your packs together using connectors. Straight after that comes your removeable link. From there you can hook up everything (as long as you use the positeve leads offcourse). So in this case 3 esc's (motor left, right and axe) and your led. (the longer wire on the led is the positive lead I believe)
Your negative leads don't need a removeable link and can be hooked up straight to your components.