heavyweight transmitter?

[thorak_nemesis]

just want to check is this type of tx allowed for heavies as i know the old 40mhz are no longer allowed

Spektrum DX4e DSMX 4-Channel Full Range

[blazerbotics]

TX is fine, just make sure you can failsafe on all channels on the RX.

[thorak_nemesis]

should be ok, on vantec and the flipper has an fs1

[blazerbotics]

It wont. as the RX will output a valid signal (normally last position), the FS1/Vantec won't know. You need an RX that either stops sending a signal when in failsafe (therefore your vantec/FS1 would kick in) or a RX that will allow you to set the failsafe positions.

[thorak_nemesis]

ok good points there,
as im coming back into this after being out a while could you recommend a few radio sets that would be suitable

many thanks

[plargen]

the spektrum transmitters are good you would just have to get a receiver that has failsafes

http://www.ebay.co.uk/itm/New-Orange...item3cd6801140

or buy some external failsafes

http://www.ebay.co.uk/itm/B7044-RC-N...item4d135c27f2

[thorak_nemesis]

so basically if i get a spektrum tx and an orange Rx that covers all bases on the fail safe side of things