why you mounted your ram to a plate then that plate to a base plate thats just as thick? looks well heavy...
why you mounted your ram to a plate then that plate to a base plate thats just as thick? looks well heavy...
so that i can put a different ram in eventually and instead of having different holes everywhere i can just make a new plate. Plus with it bolting into the sides of the bulkheads gives it more strength
Designed and machined a lipo box that mounts to the motor/wheel mount.
TS3s lipo holder is ok but not having any foam/padding in has started marking the battery with all the knocks and bumps of the champs. So on this one i allowed for 3mm extra on each side to fit some foam in.
and i no the valves not going to have a great flow rate but im just getting it all working for now and ill see about making it more powerful later on. For what i want it for and for the events it'll do the old robot had a decent flip with the same set up so it'll do me for now.
lots of pics below....
BILD0018.JPG
BILD0021.JPG
BILD0022.JPG
seems ya dont have to place them in the post anymore but anyway more below in the attached thumbnails thing!
Few more pics of the bottle holder and the box design.....
BILD0012.JPG
BILD0013.JPG
BILD0014.JPG
This is really cool, do you draw it in the computer and then push it up to a CNC machine to mill the parts?
cheers, and nah well i dunno why but i still prefere to draw it all up by hand rather than using cad, for alot of what you see i've got to scale cardboard templates (will put a pic up when i've got a sec) and i just program it all on the control panel on the machine. few bits had to be worked out on cad like the bottle holder section and the positions of the axles to the motors for the motor mounts
designed and started making an electronics holder to hold the reciever, BEC, etc etc. it will mount to the top of the other sides drive mount when i hopefully finish it tomorrow afternoon.
few more bits to do to it yet- the bottom wants skimming off to leave a little mounting block like on the lipo box and a little lid making.
pictures below......
BILD0001.JPG
BILD0002.JPG
BILD0003.JPG
BILD0004.JPG
BILD0005.JPG
Very nice!
cheers
more done, made a lower outer hardox rim so to speak to stiffen up the robot and for armour to attach too. weight wise its not actually too bad atm i recon its do-able but thats with a new ram which ill make evetually as the current one weighs 2.3kg!
pics and what not below.....
electronics holder done and in, - very light too!
BILD0017 (2).JPG
BILD0018 (2).JPG
BILD0020 (2).JPG
BILD0021 (2).JPG
BILD0023 (2).JPG
started designing the weight saving i was going to do on the main bulkheads.
designed it on paper first then cadded it up and got the program wrote up on my machine and took a pic of the graphics (last picture)
I love the way everything has a home and it's so neat and compact! Which motors are they you have? And as they look a bit massive do you have a beefy controller for them? Oh...second stupid question, is one bottle the supply and the other the buffer?
Bookmarks