Antabuse (aka DieSulfiram)

**harry hills** · 2nd July 2013, 11:10

http://www.directplasticsonline.co.uk/

or ebay

**JamesDavies** · 5th July 2013, 21:11

Great thanks

**JamesDavies** · 9th July 2013, 12:18

Put some HDPE over antabuse. I think I overdid it a bit going for 6mm as it's not 200g :/ 100g for the armour and 100g for the innards. Thinking of going down to 3.. which *should* bring me down to exactly 150g.

Some pics:
IMG_1324.jpg IMG_1325.jpg

**harry hills** · 9th July 2013, 12:24

I'm not surprised that's 200g It's not standard practice to make all your robot from the same thickness material. Try and build a robot with sides. Have 6mm side peices and then you can screw thinner panels to it. Also, maybes try for a wedge?

**JamesDavies** · 9th July 2013, 14:00

No, I now realise that

I was planning to put thinner material on the sides but with the wheels external to it. Is that sensible? Or not? Would 3mm HDPE be appropriate? I am also planning a wedge but it was starting to look like it might not fit into the cube (and the weight was shooting up and up) so I just made it as a box for now.
Cheers

**razerdave** · 9th July 2013, 14:29

It's better to have thinner stuff on top because ants don't much attack from the top. I built Baby Hell and Bulletproof with 6mm side panels with the wheels inside, and 1mm top and base plates. Seems to have stood up OK thus far

.

**JamesDavies** · 9th July 2013, 14:52

Dave- is that 1mm polycarb of HDPE? That sounds like a good plan...

**razerdave** · 9th July 2013, 15:27

Bulletproof is polycarbonate. Baby Hell is 3d printed nylon. 1mm HDPE is a bit too bendy for a base.

**JamesDavies** · 10th July 2013, 10:26

Okay. I think I'll go for some 2mm polycarb for the base and top then. Then see what weight I have left for the sides. How do you fix the polycarb together in Bulletproof?