Burst disc?
A male M25 connector isn't much use. The bottle isn't empty, it's both full & charged. I can't take the valve off now.
Burst disc?
A male M25 connector isn't much use. The bottle isn't empty, it's both full & charged. I can't take the valve off now.
So this is connecting the main tank to the rest of the system? Then you need a co2 nut on the end of a hydraulic hose ideally.
Not ideal. I'd have pipe a system back to the fire extinguisher valve to fit the the on/off & dump valves.
I suppose if I load the bottle the other way round but then I wouldn't be able to access the fire extinguisher valves in the even of an emergency.
I also have no experience of making hydraulic hoses of any description.
Last edited by psychostorm; 14th July 2013 at 08:50.
Yes of course, for a main tank you'll require fitting a burst disk somehow... The fitting looks fat enough to have a 9mm hole drilled and tapped on the side to fit one.
Recommendations for a dump valve?
Any small ballvalve that can take the pressure.
Bookmarks