Been really bad on a daily update basis so just going to combine it all into a single post


11-06-2013
Hey, I found trojan 2
Well the box containing all the parts for it anyway. I was mainly looking for useful things like, cradle, link, possibly armour panels.
2013-06-10 22.02.50.jpg
You can see the changes of size between them both. Trojan 3 is longer but it comes back in like a U shape. Yep, Not too proud of these.
2013-06-10 21.59.54.jpg
All the handy old bits. Cradle will definitely be used. Not sure about the rest.
2013-06-10 22.18.14.jpg


After a bit of work on trojan I have decided that the travel on half of the wheels is just too bad and I will need to most likely remake them or even pick up some new wheels. Time isnt an issue

Good news
My wotty, pro peak and power supply still works. Not sure why it wouldn't but you never know. However my 24v 3700 nimh back has died. It can hold about half an amp after a few cycle charges. I have had experience with bad battery packs before and have forced amps through them ultimately destroying them.

12-06-2013
Only a few hours to spare but I knew I had to fix the travel on the wheels. One wheel on each side was fine so I transferred them onto one now finished side.
I dismantled the remaining wheels and worked on re drilling and fixing them and amazingly managed to completely fix one wheel.
The other was beyond repair and I had to use a spare bane bot wheel which I haven't used. Re drilled and reattached the spur gear and also completely fixed. Funny enough the new finished side is far better then the old finished side
Also I managed to get the ni-mh pack to charge properly after a few cycles.
Here is the test with a wotty and the 24 volt pack

Sadly all the youtube enhancments will take a few hours to process so excuse the shakey, bad colour and sideways video till it sorts it self out