Going for a kind of fw dantomkia mark 1 look, but flatter and wider, with shorter wider prongs and more sloped sides. And without the paint job.

I drew some designs up in plan/side-view and have made a cardboard model (which was unfortunately stepped on, so it's a bit worse for ware at the moment). Unfortunately my camera's out of battery at the moment, so I'll get some photos tomorrow.

I've now ordered some 12awg wire, that li-po charger, a bag, a few pairs of XT60s (all from hobbyking), a couple of those wheels and some 40W blade fuses. Once that lot comes I can get properly to work. I guess in the mean time I could mark out the panels for the body.

I have around half 12mm and half 10mm HDPE. I was going to use the thicker stuff for structure (i.e. baseplate and bulkheads) and the thinner stuff for the outer armour.