Good idea for a Hardox lip Andy, thanks

Thanks Nick will have a look into that.

Mario I have 12 oz main and buffer paintball tanks, Trev reg, 5/2 way valve, QEV on the ram inlet, 63mm bore, 50mm stroke ram, bungee return, 10 bar. Think that's everything.


Tubing will probably be shortened once I make the chassis and get an idea of how everything will fit in. It's 8mm OD Nylon tube. The ram is my current 50mm bore ram (63mm in the post) and will have 12mm OD tubing between QEV and ram.

Ellis... yes... looked at my spreadsheet, turns out that's the mass for 6mm aluminium.... just saved 178g not enough for Hardox though

Thanks Alex, it's 4 wheel drive, s900s on 5s, 6:1 reduction, 483 x 434 x 140 mm, 15mm HDPE sides, 6mm HDPE top and front. Obviously subject to change if I find out it's lighter than I'm expecting (fingers crossed, although designing to the weight limit has not been a strength of mine :P )