corona ct87 2.4g conversion

[terry]

10.9v

[typhoon_driver]

receiver, not transmitter

[terry]

reciever is pluged into the robot esc which workes fine and the supply battery is 14.8v
the 40mhz reciever was pluged into it and working the esc today.

[typhoon_driver]

are you sure you have soldered it to the correct pins and that the joints aren't dry?

[terry]

quite sure, also sure ive got the antenna the right way but there was no pic in the instructions to show what way round to solder them in, was a bit of a fiddly job on them !
but the rx does flash to say its recognised the tx though.

[blazerbotics]

I used the frysky hack on a 6EXA no problems (until i melted the battery in it).