Team Undefined

[Keknom]

Deciding to start a thread for the build progress of a few battlebots , I am building. I currently have designs, and materials for 3 and shall very soon have them started.

Unnamed 12lb Wedge
Iso View
[attachment=2:2ek07x66]Iso Render.jpg[/attachment:2ek07x66]

Bottom View
[attachment=1:2ek07x66]Bottom Render.jpg[/attachment:2ek07x66]

This robot's drive consist of 4 42MM gearboxes that are in the process of being obtained from a Chinese company, that shall be driven by 2 Hacked TZ85 amp ESCs.

Armor consist of 1/8 Grade 5 titanium front and rear wedges, along with 1/4 inch UHMW side armor panels.

Frame is half inch 7050 aluminum.

Batteries 4 A123 ANR 26550 Cells

Unnamed Beater/Drum (Interchangeable Weapons)
Iso View
[attachment=0:2ek07x66]Render 4.jpg[/attachment:2ek07x66]

This robot's motors and electronics consist of a Tacon 540XL motor , and 2 banebots P60 gearboxes with RS550s for drive. The ESCs are a dynam 80 amp for weapon, and 2 Botbitz 25 amp for drive.

Armor is a mixture of .08 grade 5 titanium, and 3/8 inch UHMW.

Frame is a mixture of 3/8 inch 7050, and 6061 aluminum.

Weapon will either be a 6061 aluminum drum with hardened S7 teeth, or a 4140 steel beater.

Batteries 4 A123 ANR 26550 Cells