Definitely sounds like the relays. It's quite possible that the relay contacts might have just welded shut. If you can take the relays off the board, you should be able to take the covers off them and clean the switch contacts with either a small file or a bit of wet and dry paper. If not then you might be able to get hold of some new relays.
A bit of fun with Cherub.
It's been forever since I've put anything up here so some pics of the refurbished Saint to start with and other things to come.
The big thing on this picture apart from all the paint is the long nuts welded on either side of the body end plate. I have found over the years the body got squashed mainly by THOR these are going to have jacking bolts to try to stop this happening any more.
IMG_1679.jpg
The body had some welds re-done then just some paint.
IMG_1680.jpg
New rubber for the body drum.
IMG_1682.jpg
The drive sub assemblies are reassembled and new type chain tensioners fitted.
IMG_1685.jpg
IMG_1691.jpg
Bits put together you can see how the jacking bolts work in this one.
IMG_1692.jpg
New battery straps fitted as we wore the old ones out!
IMG_1694.jpg
information on the new wheels and top armour to come.
Posting Permissions
Reply With Quote
Bookmarks