Long time and little progress.
Changed the design a bit, is now a bit wider and a couple of glaring flaws have been sorted out, just waitng for more to become aparant.
Today I made a start on the wedge on the front, a bit of 6mm aluminum with 6 bits of 12mm nylon bolted to it, actual wedge will be a 2mm Ti, same as the baseplate this whole front wedge will be atached using 4 M10 bolts and aditional aluminum angle tapped to M4. Bulkheads will be 2 layers of 15mm hpde with 6m alu bolted to them



Still need to find some material for the bar. Considering Ti but that has proven difficult to find.
Thanks.