Hi Dan-27,

I used the dataman programmer and works well.

But you can program with the eXtreme Burner - AVR and you can take here:

Take the 1.2v in end of page

http://extremeelectronics.co.in/avr-tut ... ogrammers/

He support the HK programmer, you only need to set the fusebits.

Select atmega8,

Load the .hex file,

Configure AVR clock, the clock configuration is:

- External crystal/Ceramic ressonator
- 1Mhz and Above
- Start up time 16K+65ms
- Full R/R Swing

Pick write High fuse (must be 0xEF)

And Write all

Be happy!



Guilherme Ferreira