Team Tiberius - Clearout

[sam_smith]

Here are a couple more things i've found stored away to add to the sale...

- A couple of new unused bearings with 30mm bore 16mm wide. I was going to use these for NST's spinner but decided to change the design after I bought them. £3 each

- A hydraulic ram 50mm bore, 25mm dia rod, 300mm stroke. I could supply with either 1/4 or 3/8 BSP male fittings. This would make a great ram for a full pressure flipper or hydraulic crusher. It is in very good condition after light use on Tiberius during series 6 and 7. It was mostly built by a company called Ram builders and they lightened the cylinder a little on my request. This was run to 3000psi hydraulically and would certainly be capable of operating at 4000psi if required for a hydraulic robot. It would also be ideal for use pneumatically as it has a deep steel threaded gland so would be more than up to the job of taking big impacts. £45