I really need 3 of them i have one on its way but i dont want to pay 60 quid for another 2 so does anyone have a spare one?
I really need 3 of them i have one on its way but i dont want to pay 60 quid for another 2 so does anyone have a spare one?
FOR THE BILLIONTH TIME YOU DON'T NEED A SPEED CONTROLLER FOR A WEAPON!
A battle switch is what you want for your actuator.
Good luck on finding the next speedo.
well, you need some sort of dual battle switchy thing which are 20ish quid so that i can go up and down, i just preffer using an esc.
neither single or dual battleswitch will work, you can use a technobots or rc switcher but as you're building a crusher it may not be able to take the current. use an electronize 30 for the actuator.
I do get a laugh at some of the crap posted on here sometimes.
Roketrhino - a speedo is a perfectly acceptable and in some ways superior way to run an electronically actuated crusher. Depends entirely on what you want it to do
Harry - Do you know the spec of the linear actuator in use? If not then how can you say with any reasonable assertion that a 15A electronize will not handle it? The majority of store bought linear actuators I've seen will not draw more than a few amps even at stall. If it's a custom solution then the sums have to be done to be able to determine if a speedo will be able to handle it. A battleswitch doesn't handle more than 10A if I remember correctly anyway.
Lewis I'm afraid I don't have a spare 15A electronize, good luck in looking for a couple
i use a victor 883 ( a single channel speed controller) on my custom lianc best solution i have found so far
I've got a blown victor (took a shock inside hornet allowing the fets to touch and short) that i've been meaning to get around to repair for a number of years now Fantastic controllers!
i have got a 15a electronize on the way and was thinking of using a scorpion xl for the motors.
Wait with ordering an XL untill next week.
May 6th we'll know if a Scorpion XL-GR01 combo fullfills the wishes.
if not, a XXL does the trick.
i want to order it soon though because i have to order it from america
Bookmarks