This is getting silly but here is Conker 3.12.0; still a work in progress.
Its a totally new CAD model but the machines dimensions and parameters remain near Identical.
Conker 3.12.0.jpg Conker 3.12.0 Translucent.jpg
As you can see, the 4mm Hardox sides are now slopped. What is less obvious is the Hardox plate underneath that bolts to the 20mm Alumec bulkheads. The front is now very strong! There is a 20x12mm Alumec bar running across the back and a similar one internally to stiffen up the chassis.
The Main bulkheads now extend all the way to the back of the robot. I need to work out what material I can remove safely from these to keep the weight down.
The Top and bottom Titanium panels are now 1mm thicker at 3mm.
This iteration will probably go over the limit as its the first of this format but by working out where I need the strength I can remove unnecessary material.
The electronics, drive and weapon remain the same.