Thanks guys.

I feel that I should point out that we didn't make the disc or the uprights.

The design is basically all mine but a vast amount of work has been done by other people. Sam kindly made the Disc Mounts, the armour was welded by Tad-Weld in Tadcaster and the pieces were cut by Yorkshire profiles.

With Conker 3 (Yes I am already looking at the next one) we will be designing it in such a way that we should be able to do everything once it has been waterjet cut. The plan is that once the parts are cut all we will need is a good pillar drill, strong vice and a tapping set.

I hope this isn't to presumptuous but I reckon that Binky would be great in the Tested to destruction demos!