Convenient way to swap pulleys but you'd have to change the belt too wouldn't you? In which case you'd have to dismantle it some anyway. Unless you have an adjustable tensioner.
I wouldn't need to change the belt cos I also change the pulley on the motor as well. So I would go from say 12T to 14T then maybe down to 10T. All the slack is taken out on the large pulley
Thanks to the Laser cutter at my university my massive mess up with the wheels has been resolved.
2013-05-24 12.43.34.jpg
It takes about 5 mins per wheel but I was able to re-cut each hole. I set them up to sit in a piece of 9mm MDF board with a series of 73mm holes in. I put each wheel in a hole then cut a 19mm hexagon into each wheel. The cut was 0.3mm larger than the input so it came out at 19.06mm per hole which is a very tight fit on the 19.5mm hex shaft
2013-05-24 13.44.35.jpg
Afterwards I am left with some perfectly straight wheels and these random little bits of plastic.
2013-05-24 14.16.06.jpg
A note to anyone buying from Banebots...
The parts I ordered were:
-4x RS775 Motors
-4x 16:1 7nn Gearbox's
-8x 73mm Wheels
-8x 1/2 inch Hubs, 1 Wide
Cost £303 which is no problem.
The import tax on that (Which I got the letter for this morning) is £61.65. That's an additional 20%.
I know there isn't anything we can do about it but I just thought I would let people know.
That's standard for all imports over a certain value. Welcome to the uk
yep, hate to think the tax man might go without.....
Sometimes you get lucky when importing things. When ever I get upset about how things are so much cheaper in the states I realise that Brazil is far worse then us when I visit.
55% additional Tax
Well the parts are finally here and I can say one thing... We are never going to run out of wheels!
2013-06-05 10.52.49.jpg
I also didn't quite appreciate just how big a motor I was using for my drive!
2013-06-05 10.55.00.jpg 2013-06-05 10.56.29.jpg
Conker 3 is going to SHIFT!
Pfft you think your motors are big? I laugh at your puny "big motors"
Jokes aside, Looking really nice so far. Why So many wheels? Spares?
I'm slightly disturbed that The Riddler's been at a couple of your wheels...
Posting Permissions
Reply With Quote
Bookmarks