Team Storm Clearout - Actuators, Motors and more

[teamstorm]

Having a clear-out of the workshop at TeamStorm Towers, and have decided to put some things up for sale :

2 x NPC T-64 Gearmotors - http://www.robotcombat.com/products/NPC-T64.html - perfect for building a Heavyweight robot quickly, fully integrated and very sturdy. Cost $800 (£550 inc import taxes). In very good condition. Looking for £150 each - or bought with fully running tracked base unit (details and pics available) - £500

2 x Duff Norton Linear Actuators (as used in Force X http://www.teamstorm.com/feathers/forcex.htm) and on Suicidal Tendancies these are Duff Norton TMD-500's (500lbs of force) 12-24v. Very similar to these http://www.duffnorton.com/productdetails.aspx?id=7887. 6 stroke. (RRP - £180/actuator)

2 x Servomech Linear Actuators (as used in Tornado's lifting forks), 4 stroke - beautifully manufactured (RRP - £220/actuator)

Looking for £100 each for the actuators

6 x GT Electronics H5 Speed controller (ideal for use controlling the actuators) picture here http://www.gt-electronics.freeserve.co.uk/index.html and details here http://www.gt-electronics.freeserve.co. ... 5_v1_0.pdf built by George Francis of Chaos 2 fame. Full positional servo control of the actuators. Looking for £25 each for the H5's

1 x Spare LEM130 (just serviced by LEM and not run) Motor with 9-tooth MOD2 gear welded to end of shaft (could be ground off). RRP £750, looking for £375

1 x Vantec RDFR47E - £200

Lots of pictures and details if people want them - get in contact !

[Mouldy]

what voltage H5's are they? 12 or 24v?

[teamstorm]

24v, the only difference between the 12 and 24 is the regulator I believe

Have been deluged with enquiries - will wade through them all tonight

or bought with fully running tracked base unit (details and pics available) - £500

Could you send a copy of the photo's to me please, I have an interest either put them on here or you can have my e-mail address.

Lots of people interested in the chassis - will take pics tomorrow when it is light

Pictures of actuators

[teamstorm]

Chassis includes tracks, bearings, frame and motors - does NOT include Vantec or Hawker batteries

At the moment we've had massive interest in the tracked chassis ! Clearly a lot of people out there fancy having a go at building something tracked - would certainly be different.

[blazerbotics]

I'll give you a fiver for Storm 1

[teamstorm]

Added 2 x Roboteq AX2550HE (the 150amp bug one) - RRP £650

Looking for £400 each - just fully serviced by Roboteq (not home-repaired !!) after a couple of dead FETs.

Ok, back from holiday so my apologies for the delay !

Pete wants the H5's so am quite happy to sell them to him (I'll bring them along to Burgess Hill)

Had an offer on the Vantec and the motors (sadly it seems no-one wants the tracked chassis whole).

The actuators I'll bring along to Burgess Hill to see if there's any interest from people there