2012 FRA UK Featherweight Championships by RoboChallenge

**Danjr1** · 12th April 2012, 17:37

Originally Posted by mattsdragons

Im sure you could get doorstop working, maybe not quite in the way you intended but should be fine

its too late now really. id rather do it properly for Burgess Hill then spend the year perfecting and improving the design (i.e. Proper 900 motors, either action electronics or graupner and those 80a ESCs from America)

**Bodge Job** · 12th April 2012, 20:00

Having electrical problems as well, one radio set is not working, and the two syrens originally controlling bruiser judders and make the robot uncontrolable, that had been getting increasing worse over time, so bruiser 1 is wired up with two high quality eBay controlers, with the working radio set. And bruiser two is going to be wired up with either the old controlers or servo set up made just before the battle. And I don't know what I could do about the radio gear, I will try and fix it, but if not, it is just another reason not to use bruiser 2.

**Leonardomayo** · 12th April 2012, 20:05

Possibly a stupid question but is the battery fully charged? Johnny 2x4 started juddering and wouldn't move if it was on a rather low battery.

**harry hills** · 12th April 2012, 20:29

it seems it is the time for electrcal problems, i have a real problem with ML:
when i push the stick up, or tell both sets of motors to move all i get is a groan. lifter works fine.
when i run either side on its own, its fine and up to power.

any ideas?