right,

havent done much in ages with laser as i have been so busy and not had access to the workshop for a while. I hadnt really touched Laser since the champs, but the scorpian xxl had broken in it so we have decided to go to hacked brushless esc's. Instead of buying the esc's ready ahcked I decided to hack them myself:

esc opened up


programming pins soldered on


esc's hacked


total money spent =£100 and i saved about £100 doing it myself.


The next thing to do on laser was to change the hdpe base to a 3mm ali base, which was done quite easily.
The other thing I have dont is swapped the lifter motor for a DeWalt drill, this now means it ias about 3x more powerfull and i have an option of 2 speeds.