Got a few more things up for sale- PM offers

First up is my Beetleweight- Built a while back and has not been used- needs rewiring. Includes

5mm HDPE chassis
2x 11:1 MFA motors with Custom wheels
Sabretooth 10A ESC
2, 2cell, 1000mAh Lipo packs
Spektrum AR6200 rx
Drum Spinner with large brushed motor on 1:1 ratio via timing belts
Blue speedo for drum
Designed to have interchangeable weapons so the drum can be removed using 4 screws


Spektrum DX5e Tx.


Several Antweight Shells

These include the 3D printed fleaweight shell and flipper arm from Shapeways- 2mm thick with mounting points for base plate.

Ant Awe 6 shell- used for a couple of years- some slight damage

Carbon fibre and Vacuum formed shell- based on Thor, never completed


Recoil- half finished fleaweight
3D printed chassis with carbon fibre shell
Flipper servo, voltage regulator and Lipo- no rx or drive servos


Lots of ant parts including

2x 50:1 HP pololu motors with wheels attached

1x Peter Waller option D speed controller

1x Technobots Z48 controller with RC lead- never used

1x Parkflyer HPXF servo

1x Aluminum drum- for 18mm outrunner motor- no teeth

1x 6ch 40MHz rx

1x 5g micro servo

1x Brushed single channel single direction ESC

2x 9g 360 degree modded speed hacked servos

2x 6g 360 degree modded speed hacked servos

1x 6v park BEC



Next load of Parts will be featherweight bits including a LP pneumatics setup