scruffy

[plargen]

ok bit of an update

I've tack welded the side plates to the back end of the bot still have to cut the front and top plate and trim the aluminium base plate down to size

im also now building the lifter mech into the top armour instead of having a supporting frame from the base plate


the structure so far is 100mm dia tube 4mm thick sliced in half at the back with about a 16deg angle on either side, the 2 side panels are made out of 3mm mild steel, the front pannel will also be the same and the base plate is 6mm aluminium which might be a bit thick ?