Ah I see thanks for the info.
Just remember I've read about ppl having the bec to shut down while using the Park HPX servos because of their high current draw
and wanted to not suffer from that, and afaik it would be able to flip most things at 6V anyways.
But I'll look it up and try it in another project as I should have plenty of weight left over for the regulator anyways.

Made the top shell along with servo holder and then soldered the regulator to the removable link and put a mini deans as the cables were short:


This is my current progress on my FW which has no name as of now:


Specs:
4WD by 4 standard drill motors (100mm blue wheels)
Sabertooth 2x25 Speed controller
Lifter powered by drill motor and threaded rod
Electronize 30A weapon controller
4600mAh home made NiMh 12v battery
15mm HDPE armor (5mm top and bottom)