Creepy!
Printable View
Creepy!
Would this do to go on my bottles a on/off?
http://www.screwfix.com/p/full-bore-...lve-15mm/80413
F.P.?
NO..there's no indication of a pressure rating which will be a LOT less than 60 bar.
No lp 10 bar system and ok thanks
just use one of these for LP http://www.technobotsonline.com/pneumat ... alves.html
I got a feeling that ninja will turn to a 2WD rambot and my second bot a pneumatic one made from plastic ( we have given up welding and doing bolts and stuff like that) so expect more work soon! :proud:
The bot will have a swap of weapons later on in it's life: a drum spinning, a blade and some spikes :twisted:
just to warn you. i tried something similar and its difficult! before you even start cutting anything, make sure your designs are perfect!
Update!!:
First the frame is done and yes i could of had it done alot sooner if I did some in may, June, July but hay ;) base plate and one side Panel are on. Base was from a old boiler And the side panel was from a cooker plate thing ( u know what I mean!). The top and other side will be done tomorrow. Side again the cooker thing and top a different old boiler. So far it weight 4kilos and with that I'm thinking of 4wd =)
Good day (haat films there( minecraft peeps)
*pictures up tomorrow
How many amps does a 14.4v motor draw under fighting use?
The heavy is on hold due to new desktop computer, the top will not get done as we can't get the boiler tomorrow, typical :roll: :lol: instead it will be other side panel and wiring
Good day
P.s I have a wacky idea for a nether before seen heavy/middle weight <-- if we can get that weight class kick started
http://i1207.photobucket.com/albums/...s/47096755.jpg
http://i1207.photobucket.com/albums/...s/d1efab32.jpg
Done some of the wire's an d found out that I'm a better at that than my dad :lol: anyway yes I coming on just trying to find some more metal and trying to stop breaking all the drill bits! Al u can see we need 2 more drill to be hacked and the batteries will sit at the back above the motors, all 4 of them.
(takin on my iPad)
Photos finally!!!
Very Bitza!
Yay! :rofl: I think jonny will be happy! Waiting for your pictures now (or have I missed them!)
We found out that the cooking tray was my sisters uni friends! :uhoh:
WAS being the operative word!
Yes as nw it looks more like a rustic bent art formation!
and should be getting some drills tonight, see if i can hack them tonight aswellQuote:
Originally Posted by Thunder arrow
there wasnt that much metal on the other boiler (gas boiler) so im doubling up a washing machine for the back to 1.5mm the top... i dont know
redesign... dammit :rofl:
yeah that will be my second or third as of the peunumatic design of it.
this will be a rambot and a swap of spiner or axe (can decide)
brushed or brushless for a blade/bar?
im buying a speed 900 motor, doing the new design right now :P
forget all other question
could i use a 12a sabretooth for 4 drill motors?
not really, you want a 25a version
where is the cheapest place to get them
umm robot bits or the robot market place
What the equation to work out how many amps a motor draws?
Amps = Voltage/Resistance
Also, P(ower) = I(Amps) x V(oltage)
Which can be re-arranged to get amps, such that:
I = P/V
Ok thanks
EDIT: I didn't know if my workings out where wrong so I used this http://i1207.photobucket.com/albums/...s/cae02b98.jpg
Have I set it up right?
Seems awful slow and also a very low current rating?
Unless you're using extra gearing on the drill the gear ratio should be 1:1 which will cause the peak current draw to be about 25A and give about 7mph
Should be ordering plastic today 1000mm x 500mm x 10 which will be beefed up with some metal (this might not happen if my dad forgets! :roll: ....again)
How much is tax to buy from http://www.dimensionengineering.com/...ooth2X12RC.htm ?
Lots! When I ordered one £20 customs charge!
Buy from Technobots, their prices are pretty good given the current exchange rate and potential customs charge. Although DE will deliver for £2.50.
Plus I do believe members of the FRA get a discount at Technobots.
But if you order it from de then they will replace it for free if it breaks whilst being used to it's specifications
i dont know, ill wait till techno has them in stock
anyhow, its hard persuading my dad hdpe 10mm with metal is strong
10mm on its own is stong!
just get a hammer and smack a sheet of it = good demo