Build Log | Caractacus - Any Tips?

[Maxamuslead]

Sorry didn't see your last reply. THIIS https://botbitz.com.au/collections/f...eed-control-v2

Unfortunately they are out of stock so best chances of getting th axe working would be either buy feathertwo single, tz85 or bb80 of someone which will definitely work and run all day everyday. Or using a 30a you ESC which should take it but will not be as happy

[willcaddy]

Yeah, using a standard LED, you can add in a resistor to reduce the current to stop it from destroying itself. Ebay has lots of prewired 24v leds that have the resistor and series wired leds.

I used a strip of Leds and then placed it inside the bot and used some 10mm thick acrylic as a guide pipe to illuminate an exposed section of my frame. Worked well.

Awesome thank you, i didn't know that was a thing

Sorry didn't see your last reply. THIIS https://botbitz.com.au/collections/f...eed-control-v2

Unfortunately they are out of stock so best chances of getting th axe working would be either buy feathertwo single, tz85 or bb80 of someone which will definitely work and run all day everyday. Or using a 30a you ESC which should take it but will not be as happy

No worries! I ordered one of the replacement 80A BotBitz ones but wont be here in time so I'm going to build a ridiculous looking push bot for experience xD