*four* links?
*four* links?
I have seen too many self removing Anderson links in the 15 years I'm a roboteer.
Since we went to EC5 for Bullfrog, we didn't suffer from that anymore.
I have used a 2 pin plug and socket, on the socket my positive is wired into - and out from
+ and I have joined the pins in the plug. The plug has no fuse and therefore no rating, will this be allowed?
Do you mean a mains power plug? They are not rated for the high currents in a heavyweight and it will likely melt.
EC8's are fine.. but how you mount them is more important. If you just have an access hole with no cover/ no physical stop to prevent the connector coming out... it probably will.
What's the 'done' way to keep an access cover closed?
Wingnut
Bookmarks