For Brutus we use the spektrum DX6I . We need a flipfunction for it . We use 1 stick drive .
We tried this , but did not work
MIX 1
ELEV -> ELEV ACT
RATE D 100% U -100%
SW ELE D/R TRIM INH
Or is a stock flipswitch somewhere for sale ... ?
For Brutus we use the spektrum DX6I . We need a flipfunction for it . We use 1 stick drive .
We tried this , but did not work
MIX 1
ELEV -> ELEV ACT
RATE D 100% U -100%
SW ELE D/R TRIM INH
Or is a stock flipswitch somewhere for sale ... ?
realy nobody ... ?
There is probably an expert way to do it but I would just fit a dpdt switch on the tx so it swaps the 2 outside wires round on the pot.
so then the stick will be reversed.
Last edited by terry; 2nd February 2016 at 19:10.
what is a dpdt switch ... ? link please ...
DPDT = double pole, double throw. Any decent electronics store will have several types of DPDT toggle switch to choose from.
http://www.eleinmec.com/article.asp?12
this is a plan of wiring
just put this on the 2 outside pot wires.
problem solved ... we tried an DX5 and it works just fine ...
thanx for the advise anyway ...
Bookmarks