360 - mini hypnodisc

[Ellis]

Pretty sure this is the genuine Mabuchi 18v 775: http://www.adepem.com/PIECES-DETACHEES-119672.html

edit: yeah spec sheet seems a match for the advertised specs on the Banebots website for the RS775-18.

edit2: that French site says it's compatible with this drill: http://www.ebay.co.uk/itm/RYOBI-CHP1...item58984a2d56 - suggesting it might be a source of the right motor and the gearboxes could be put back on sale or butchered for the good bits?

[Mouldy]

look slightly different to the banebots ones... these seem pretty close too;

http://www.aliexpress.com/item/775-h...311023187.html

[Mouldy]

can you choose an option for that site to display in english btw

[Ellis]

If you're on Chrome, right click>translate to English. Other browsers probably the same.

[maddox10]

4.7A nominal load. Not a patch on even an el cheapo drill.

[Mouldy]

sorry wrong link;

http://www.pollin.de/shop/dt/MTc0OTg...C785LP_HS.html

Tim did some maths.. apparently will give around 22% higher speed and pull less amps than the rs775.

[mattsdragons]

Think those motors above could still be mated to the same Ryobi gearboxes?

[Mouldy]

Why would i want to do that?

[cavecrusher]

Tim did some maths.. apparently will give around 22% higher speed and pull less amps than the rs775.

The only real conclusion I made, is that they're cheap enough to just if it will work :P

[PJ-27]

Anyone got a good source for 5mm ID pinion gears? I know Chris mentioned he got his from Gimson but it doesn't seem he does them anymore.