I would like some Advice on which speed controller our Team
should buy for use in our latest heavyweight creation.
In the past I have allways used my own relay system and
this would be my first my first experience with speed controllers.

I have seen this two channel model on the Roboteq website
and wondered whether it would be suitable.

http://www.robotmarketplace.com/products/0-xdc2460.html
The motors I have are 20 amp and 24 volt each-I know I would
need to buy a cable to the reciever but have a question
regarding.
1 would the speed controller come ready to use and work
my motors straight from a rc reciever or would it need
programming.