Register To Comment
Results 1 to 4 of 4

Thread: Gauge of Wire

  1. #1
    Member

    Status
    Offline
    Name
    Adam P
    Posts
    56
    Post Thanks / Like
    I'm wondering what gauge of wire should I get? I'm building a lightweight 4 wheel wedge, using the DeWut motors from Charles Guan as well as 2 ragebridge2 speed controllers.

  2. #2
    Member

    Status
    Offline
    Name
    Nat
    Robots
    Short Circuit (HW RWs6) DELLapidated bANTtery (AW) LowMoe (AW) Several unnamed ants
    Location
    Eastleigh, Hampshire
    Posts
    151
    Post Thanks / Like
    I am using 10AWG, its rated to 30 amp continuous so suitable for my build / fuse ratings, and its what is fitted on my LIPO.

    I did read about this on the rules and regs and i feel it fits within them.
    The 10AWG is also the rated wire fitted to the Turnigy TZ85A esc (I BELIEVE??).

    If I am also in the wrong, please let me know
    Last edited by Roboteernat; 15th November 2017 at 16:11.

  3. #3
    Ocracoke's Avatar
    Team Kaizen

    Status
    Offline
    Name
    Michael
    Robots
    Osu - AW / Shu! (Building) - BW / The Honey Badger - FW / Kaizen (Building) - HW
    Location
    Somewhere on the Wirral
    Posts
    216
    Post Thanks / Like
    Fairly sure, looking at a picture of the TZ85A, they come with 12AWG, not 10.
    Team Kaizen

    AW - Osu
    BW - Shu! (Build Thread)
    FW - The Honey Badger (Build Thread)
    HW - Kaizen (Build Thread)

  4. #4
    Member

    Status
    Offline
    Name
    Nat
    Robots
    Short Circuit (HW RWs6) DELLapidated bANTtery (AW) LowMoe (AW) Several unnamed ants
    Location
    Eastleigh, Hampshire
    Posts
    151
    Post Thanks / Like
    Dont have it to hand,. i may be wrong

    Looks like they are 12...
    https://hobbyking.com/en_us/turnigy-...___store=en_us
    Last edited by Roboteernat; 15th November 2017 at 16:12.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •