Hey there everyone! An update to my bldc drive activities. After some deliberation I desided to go with the Aerodrive SK3 2122 2100kv motors. I will use these motors in conjunction with some 25GA 500rpm motor gearboxes. Here is one I have assembled.

It was suprisingly easy to assemble, the gear on the dc motor was a bit tricky to take off. It went flying in my room to land and perfectly camoflage on my floor! Everything i used to assemble it came with the gear box and motor, with exception to some epoxy glue and m2 washers.

I placed the m2 washers underneath the gear on the motor shaft in order for it to engage with the gearbox. I epoxied the gear onto the motor shaft, the gear was a bit loose around the shaft but after i assembled everything i spun the gear box shaft as a crude way to centre the gear on the motor shft before the epoxy dried.