Testing the waters robot building

[khevolution]

thanks for the suggestion R9000, might give that a go, im sure that will make things easier when it comes to putting everything together, looking for hubs/wheels, would the banebots T81 wheels and hubs fit straight on?

[Maxamuslead]

thanks for the suggestion R9000, might give that a go, im sure that will make things easier when it comes to putting everything together, looking for hubs/wheels, would the banebots T81 wheels and hubs fit straight on?

Depending on the diameter of the motors gearbox axle (4mm IIRC) these hubs will work

http://www.robotshop.com/uk/hex-hub-s40-4mm-1wide.html

or duel wheels these

http://www.robotshop.com/uk/hex-hub-s40-4mm-2wide.html

and i uses these wheels myself

http://www.robotshop.com/uk/rb-ban-94-orange-wheel.html

[khevolution]

thank you, was looking at them, I know it seems like a silly question but i can see how the grub screw goes into the hub and onto the motor shaft, but how does the wheel stay on?

Whats postage speed like on the robotshop site, i got one inpatient boy wanting everything to arrive tomorrow if it was possible.