So I flumped at building a FW so going start a bit smaller for practice.
Looking at MFA motors on technobots but I'm bit confused as to what I'm looking at, there is so many. Any pointers would be good!
So I flumped at building a FW so going start a bit smaller for practice.
Looking at MFA motors on technobots but I'm bit confused as to what I'm looking at, there is so many. Any pointers would be good!
I think most would be using the 25mm motors, I'm planning too. Then its just a case of picking what ratio you want. I'm going for a pair of 15:1's.
Ah I was looking in the wrong place, I just search for MFA motors and it gave me all ungeared motors lol. Thanks for your help!
Whats the stall current on the 15:1's?
Minimal.
http://www.technobotsonline.com/re-2...rbox-30-1.html
0.3a nominal.
Thanks but is this not the load rather than stall current. Thinking of running 4WD and wondering if a 5A dual speedcontroller will handle a stall or if I should go up to 12A?
12a sabertooth is £2 more, i'd go for that if you were set on a sabertooth. Recommend the Botbitz controllers though!
Just wondering, anyone have any of these types of motors, (or anything suitable for a beetleweight in the 22-25mm range) for sale?
Didn't think this was worth a whole topic in the wanted section/
Cheers
Bookmarks