ALEX MARLER SALE

[psycho_fling]

Hi Guys
Got a long list of bits and bobs I want/need to sell.All these bits I have no use for and are taking up space in my shed so need to shift them.Below is a list of all the items and a link to pics of each.Send me a pm or email or something if you€™re interested in a certain lot.
Items:
€ Ansmann Nicad/Nimh charger discharger with wall plug
€ 3x relays details of spec seen in picture
€ 1x other relay
€ Electronize fr15hx controller (note I will find out which wire does what , and check condition)
€ Bag of mixed tamiya connectors different conditions
€ Mini steel claw made from 25mm box section L=210MM, H=130MM
€ 2 x mini moto tyres and hubs 250MM DIAMETER
€ ½ a zeobot base 6mm ali
€ Ali box 3mm thick (was going to be a small rat bot armour) L=280MM, W=200MM, H=55MM
€ Heatshrink flat width= 150mm, L=520MM
€ 4 scooter wheels with bearings used 90MM DIAMETER
€ 200:1 motor unsure of voltage but below 12v id say
€ 2x wheels bonded rubber, will fit bosch 35 motors W=25MM, 65MM DIAMETER
€ 1 x 14.4v drill and charger and batt, I would say not working tried to fix the trigger but no luck the motor will still be good I think, it is a 2 speed gearbox
€ Electronize switcher good for fw lifter
€ 4mm base (with holes) made up of 2X 2mm sheets ali L=550MM, W=280MM
€ Zeobot lifter bearing block
€ Misc plastic hub 100MM DIAMETER
€ Piece of 12mm hdpe
€ 8mm hdpe sheet (holes)
€ Bits of 10mm hdpe
€ Bits of 6mm poly carb
€ Bits of 6mm HDPE
€ Old psycho fling shell, 3mm stainless sheet , L=530mm, W=290MM, H=100MM, RAMP LENGTH = 220MM with lifter arm and hinge strong construction no dmage
€ Old fw flipper panel, 3mm steel sheet rusty, L=480MM, W=295MM
€ Old psycho fling frame fits the above shell
€ Selection of various sized bits of 3mm ali
€ 3mm steel sheet L= 600MM, W= 440MM
€ Old crumple zone fw armour, all 1.8mm ti
€ Selection of 3mm ali bent and previously used
€ Selection of 6mm ali pieces inc chequer plate
€ Old crumple zone front ramp x3 different variations
€ 2x stainless steel sheets 1.5mm thick, A) L=290MM, W=180MM B) L=290MM, W=205MM
€ Various bits of box section
€ 3.2mm hardox small bits
€ Bits of random steel
€ Small bits and offcuts, 1.8mm titanium
€ Mini robot chassis another rat bot thing T shaped , L=300MM, W=280MM, H=55MM

PHOTOS= http://s737.photobucket.com/albums/xx17 ... OR%20SALE/

All the photos titles should indicate which item listed above they relate to, as there is a wide selection here and some items I have invested money and time into the prices can be discussed privately.

Thanks for looking, any questions post here or pm me

Alexpsychoflingteam@hotmail.co.uk

[joey_picus]

I am rather interested in the Bosch 35 wheels sent a PM.

[RogueTwoRobots]

Interested in the claw and the mini T-chassis but I'm heading out shortly; can you temporarily reserve them for me please until I get back and can discuss details? Muchas gracias

[mattsdragons]

dam, i wanted those claws! and the mini t chassie!

still, shot gun the tamiyas, heat shrinks and mabey the old psycho body

[harry hills]

how mutch for the electronise? btw whats a zeobot??

[RogueTwoRobots]

Actually, scrap my last post. Didn't take full notice of the sizes at the time of reading but they don't quite fit with the ideas I had in mind. Sorry

[mattsdragons]

change mine then

pm me about those claws, mini t chassie, the tamiyas, heat shrinks and mabey the old psycho body

[harry hills]

i think its only one claw

[mattsdragons]

i think its only one claw

acually, scrap the claw, im interested in the rest

and the heat shrinks

[psychostorm]

btw whats a zeobot??

Well you stick your arm in the air & yell 'I need Zeo bot power now!'. A zeo bot will then fall out of the sky. It comes quicker if you're wearing lycra.

No, only kidding. It was the name of the technobots.co.uk kit featherweight. Psycho fling was built from one.