Be aware Theo that that is infact the old website
Try www.technobotsonline.com ... He may not do some of the robot based stuff anymore
Be aware Theo that that is infact the old website
Try www.technobotsonline.com ... He may not do some of the robot based stuff anymore
http://www.technobots.co.uk/acatalog/Sh ... A_670.html
Simply replace the motor in the drawing with your valve solenoid.
That's assuming you can buy this switch from the new site.
what drawing .......
o i found it
and yes they do still sell them
do u have a pic of a inside of a robot with 1 like that with a speed controller
(because i dont understand how u put the battery wire to the speed controller and battle swich)
Theo
made a mircosoft thingy
Here's a std type pneumatic diagram.
[attachment=0:3sfmg295]PNEUMATIC%20DIAG.JPG[/attachment:3sfmg295]
So would my 1 work
But how do u split the battery (1 to the speed controller and 1 to the battle swich
or do u do something different
theo
Lets start with a simple battery , motor and dual speed controller setup.
NOTE that the receiver is usually powered from the speed controllers BEC.
http://homepages.which.net/~paul.hills/Emc/BecBody.html[attachment=0:fn44r4tl]bat motor controller.JPG[/attachment:fn44r4tl]
Questions?
No prob with that but how do u give power to the esc and the weapon
because the pic that was on tecnobots said that the battle switch (for the flipper) needed
to be conected to the battery
Theo
an inside of my robot
Bookmarks