Register To Comment
Page 26 of 26 FirstFirst ... 16242526
Results 251 to 260 of 260

Thread: From The Ground Up (Advice Thread)

  1. #251
    Max's Avatar
    Member

    I would use some kind of stickers/ sticky back plastic and stencils.

  2. #252

  3. #253

  4. #254
    With a sabretooth only 1 LED should be lit in normal operations (the blue one). Red one only comes on if there is a problem.

    As for the binding issue, here is how you should do it:

    1: Put bind plug in the Batt/bind slot on your RX
    2: plug a receiver pack (or some other 4.8-6v power source) into any other socket. Make sure the polarity matches the little symbols on the RX's case. It should be flashing its amber LED.
    3: On the TX, pull the switch marked 'Trainer' towards you and hold it there. Turn on the TX; all the power lights should light up and flash.
    4: The amber light on the receiver should blink slowly, go out, then go solidly on. Release the trainer switch. Job done.

    If it does not work, then your receiver is probably knackerd.

  5. #255

  6. #256
    Ah I see where you're going wrong. Leave the sabretooth to one side. You've connected a positive to the RX but no negative for it to connect with. Use just a normal RC battery pack and leave the middle wire in your home made bind plug alone. You can use the sabretooth if you want, just plug one of the channel leads into another socket (the positive and negative are parallel so it doesn't matter where you plug it for this bit).

  7. #257

  8. #258
    all you need to do in order is

    plug in the bind plug (connecting top and bottom pin)

    plug in the battery or power to the rx eg something like this http://www.ebay.co.uk/itm/Miniature-...item35c8343811 or an esc with built in bec

    then pull the long toggle switch on the left of the transmitter and turn it on cant quite remember how long for tho

    and it should bind

  9. #259
    have you watched this


  10. #260

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •