BattleRatz layout

[CPA23]

Hi guys, I recently purchased a BattleRatz kit from Roaming Robots and I am about to install the Battery, Speed Controller & Fuse but do not know where they go, does anyone have any ideas where they go, or better yet, a diagram?

[psycho_fling]

i thought the kits came with instructions with diagrams?

i think if your usihg the sealed lead acid battery that fits in the hole under the flipper arm

best to ring or email Jonno he will know how to advise on the kit you have purchased

btw are you coming to any RR events to fight your battlerat?

alex

[CPA23]

thanks for the help, I thought that was where the battery went.

and yes, I will be bringing Renegade to roaming robots events.

[CPA23]

ok, layout is fixed but I do have one more question, I have connected the Forward and Turn control wires to the correct slot, but which channel does Flip connect to?

[psycho_fling]

your choice but you won't need it just keep it tied its for when a robot gets flipped over you flick a switch and all your controls are the right way round again

[CPA23]

Ok, all wired up, tried to do a test, nothing, no signs of life, any ideas?

[Ellis]

Charged the battery?

[widow_twanky]

put the link in?

plugged the transmitter battery in?

Checked the transmitter battery is connected to the receiver the right way round?

bound the transmitter?

Had any blue smoke released from the speed controller?

[CPA23]

Battery was charged , but the reciever battery was missing :sad: , hopefully nothing else will go wrong, and by the way is the name Renegade :twisted: already taken, if not it's reserved by me.

[widow_twanky]

Battery was charged , but the reciever battery was missing :sad: , hopefully nothing else will go wrong, and by the way is the name Renegade :twisted: already taken, if not it's reserved by me.

Best get used to hearing 'and the winner iiiiiiiiiiiiis..............................CYANID E!!'

Look forward to seeing Renegade