Robot SMASH!!

[pcbore]

Sorry about fudging up the football part. Ill just enter Acronyms FTW.

[joey_picus]

Ziggo was a lightweight, as far as I remember.

[corsair_lightning]

Martijn, If you make a new A Night at the Bar robot, you could call it:

+2>Our Third Night at the Bar

[majinb]

Could I?

[corsair_lightning]

Possibly.:wink:

[paulc]

Ill enter for team Insanity...

Nitro-Gene 4.0 (Also competing in Annihilator and Tag Team)

€ WEIGHT: 100kg

€ ARMOUR: 5mm Hardox for the body. 6mm Hardox flipper.

€ SHAPE: Low invertible box with pointed sides and rear. At the front is a 42* wedge to aid in getting underneath other robots. All the lines have been curved over to make it harder for a spinner to grab onto a panel and rip.

€ MOTORS: 4 x LEM 130€™s at 36V = 36HP

€ LOCOMOTION: 4 Vulkanised Wheels.

€ DIMENSIONS: (L) 90CM (H) 17CM (W) 70CM

€ COLOUR: Black all over with the flipper coloured red.

€ WEAPONRY: A full pressure Nitrogen powered flipper at 1000psi, using a single 80mm ram at 1000psi. The flipper is mounted in the middle of the robot, and is 20cm wide and runs 30cm up the body. Using a 3cm long Titanium strip underneath the flipper, and a heavy flipping arm, the flipper runs completely along the ground. Running on a ratio 2.2:1, the flipper produces 1600kg of force at the tips, allowing me to launch anyone away! This version has 2 x 3kg Nitrogen bottles, giving me 25 flips!

€ SPEED: 22mph

€ GROUND CLEARANCE: 0MM-2CM. At the front, it is completely 0mm. On the sides/rear, its 2cm. The orginal weakness of Nitro-Gene (its high ground clearance) has been seen to by the skirts on the sides/rear. They are 5mm Titanium skirts and are joined together like BioHazard - at the corners. To avoid them breaking off, they are held in place by Hardox hinges.

€ STRENGTH: Pushing power and weaponry.

€ WEAKNESS: High speed may mean difficult driving

D.V.D (Death Via Drum) (Also competing in Challenge Belt and Tag Team)

€ WEIGHT: 100kg

€ ARMOUR: 5mm Hardox.

€ SHAPE: An invertible box shape with triangular sides and rear.

€ MOTORS: 2 x LEM130€™s at 36V = 18HP

€ LOCOMOTION: 4 Vulkanised Wheels on top and bottom ala Big Nipper.

€ DIMENSIONS: (L) 70CM (H) 23CM (W) 70CM

€ COLOUR: Black for the drum, white for the body.

€ WEAPONRY: At the front is a 15kg drum, made of Titanium with 3 sharpened tool steel teeth. The drum is powered by 2 x LEM130€™s on a ratio of 1.5:1, giving a spinning speed of 6500rpm! 65kj of energy per hit, and if flipped, the drum can be reversed to help it spin the right way - upwards. Behind the drum, there are massive amounts of shock-proofing to avoid self-destruction.

€ SPEED: 13mph

€ GROUND CLEARANCE: The ground clearance is the same all the way around, due to no skirts or wedge - its 6mm all around.

€ STRENGTH: Good all-rounder.

€ WEAKNESS: Low speeds.

WORCK

€ WEIGHT: 100kg

€ ARMOUR: 5mm Hardox for the body and flipper. 6mm Hardox for the scoop. There are hindged wedges on the sides and rear of Worck made of 3.25mm Hardox. The internals are protected by 5cm of Vulkanised rubber mounted on all sides.

€ SHAPE: A low wedge shape.

€ MOTORS: 2 x S28-400 MagMotors at 36V = 12HP

€ LOCOMOTION: 4 Vulkanised Wheels.

€ DIMENSIONS: (L) 70CM (H) 15CM (W) 70CM

€ COLOUR: Black for the flipper and barbs, white for the body.

€ WEAPONRY: A forward hindged flipper, running on a single 750psi ram running on CO2. The gas is contained in 2 x 2.5kg bottle, giving me 20 flips per fight, and the gearing on the ram 3:1 means we have 1300kg of flipping force! That should mean on a forward hindged flipper that I can flip almost everything OOTA.

€ SPEED: 13mph

€ GROUND CLEARANCE: The wedges, which join up at the corners of the robot, make the ground clearance effectively zero, but underneath the wedges is 5mm of clearance. The wedges are held on by Titanium hindges

€ STRENGTH: Near impossible to get under.

€ WEAKNESS: Low speeds.

Coinst

€ WEIGHT: 100kg with the heaviest set-up. 95kg with the lightest.

€ ARMOUR: 4mm Hardox.

€ SHAPE Low invertible box

€ MOTORS: 2 x LEM130€™s at 36V = 18HP

€ LOCOMOTION: 4 Vulkalon treaded wheels.

€ DIMENSIONS: (L) 70CM (H) 22 CM (W) 70CM

€ COLOUR: Black all over with, a green arrow pointing the way forward.

€ WEAPONRY: Interchangable weapons:
1: An invertible front wedge made of 8mm Hardox, weighing 15kg to make it super low. It is hidged so if flipped, it€™ll become invertible.
2: A 7kg Titanium drum, powered by a Lem130 at 46V. It should reach speeds of 1500rpm, and give off 25kj per hit!
3: A set of invertible lifting forks modelled on Panic Attack. They are made of Titanium, and are diamond-tipped to make them super low. Powered by 2 x Lem130€™s at 36V, they can lift 1000kg at the tips.

€ SPEED: 20mph

€ GROUND CLEARANCE: 0-10MM. On all sides are fixed skirts, made of 5mm Hardox. They are hindged in the middle so if flipped, it can still remained skirted.

€ STRENGTH: Interchangable weapons.

€ WEAKNESS: None.

Bar-Red

€ WEIGHT: 100kg

€ ARMOUR: 5mm Titanium around the sides and on the top is 9mm Titanium.

€ SHAPE: A low cylinder shape.

€ MOTORS: 2 x S28-400 MagMotors at 36V = 12HP

€ LOCOMOTION: 4 Vulkanised Wheels.

€ DIMENSIONS: (L) 70CM (H) 10CM (W) 70CM

€ COLOUR: Black for the body, and the bar is red.

€ WEAPONRY: The weapon is a bar weighing 20kg, made out of 10mm Titanium, with 2 x 1kg Hardox blocks. The bar is 90cm long and powered by 2 x S28-400 MagMotors at 36V - allowing a spinning speed of 3000rpm. Incase I€™m flipped over, I have an actuator on the bar, electrically powered by a 750 24V Bosch motor.

€ SPEED: 13mph

€ GROUND CLEARANCE: The ground clearance all around is 5mm.

€ STRENGTH: Very dangerous weaponry.

€ WEAKNESS: Unknown.

MeCannibal 2.0

€ WEIGHT: 110kg (Shuffler)

€ ARMOUR: 3.25mm Titanium on top and bottom.

€ SHAPE: Invertible low cylinder

€ MOTORS: 2 x S28-400 MagMotors at 36V = 12HP

€ LOCOMOTION: 2 x Shuffling pads

€ DIMENSIONS: (L) 80CM (W) 80CM (H) 20CM

€ COLOUR: Black with scary human face with over sized teeth coloured red.

€ WEAPONRY: Ring spinner, made of 10mm Hardox, weighing 30kg, powered by 2 x LEM130€™s at 36V to give it spinning speed of 3000rpm and producing 195KJ per blow with a spin-up time of 3 seconds, but is lethal in 1 second. It 2 big teeth made of Hardox that curve out. The teeth are inserted into the body and have rows of Tool Steel spikes on the teeth to dig in. These teeth 5kg each and are designed to send all the spinning energy into one spot rather than small amount into multiple spots. It also has 5 Inches worth of Titanium shock-proof Foam to stop it self-destructing.

€ SPEED: 15MPH

€ GROUND CLEARANCE: 0MM-8MM. It has a full-bodied 5mm Titanium skirt running completely along the ground that rises when the shell is spinning, but drops when the shell isn€™t spinning. This is powered by a simple 750w Bosch 36V motor and runs at the same time as the spinner.

€ STRENGTH: Scary name and weapon

€ WEAKNESS: Hard to control

Storm 2 (Realie)

Terrorhurtz (Realie)

Hope this satifies.

[kodster]

Count me in!!!

Main Event
Wedginator 6.0
Super Gore Evo
Seung Mina IV
Tira III
Killobite 5.0
The Curse
Shadow Zone Returns
Intrigue

Annihilator
Avarice

Tag-team
The Alexandra Sisters + Macduff the 3rd

Challenge Belt
The Zenith

Football
Aftershock

Middleweight
Solstice 2.0

Featherweight
Micro-Gore

All stats can be found here: http://strickenone.proboards99.com/index.cgi?board=generalhttp://strickenone.proboards99.com/i...?board=general

Looking forward to this one, Liam!

[steven_mcg]

Wait for meeeeee!

TEAM BRAVEHEART
1. Wedge Devolution
2. Killotine: EVO
3. Metal Sonic Spin Dash
4. Whirligig 4.5
5. E Clawdius Unum
6. Turbo Tails
7. All Scoop and No Stab Make Steve a Dull Boy
8. The Botles Reunited

1. Wedge Devolution
SHAPE- low wedge with sloped rear
COLOUR- sleek and shiny silver
WEIGHT- about 100kg
DIMENSIONS- 90cm X 75cm X 30cm
SPEED- 16mph
TURNING CIRCLE- 0
GROUND CLEARANCE- 0mm at the front, 7mm for the rest of the robot. Fitted with Biohazard-style skirts on sides and rear, giving 0mm
ARMOUR- 4mm Hardox
WHEELS- inside robot, 4-wheel drive
POWER- 2 X LEM-130s; 2 x 12v 3amp NiCad packs, giving 36v @ 12amp
WEAPONS- As usual, the main weapon is a rear-hinged flipper. This is very similar to Chaos 2, except the blade at the bottom is bent ala Bigger Brother, allowing the flipper to have greater effect against bots with skirts or low centres of gravity. The flipper itself is powered by 2 X 80mm high pressure pneumatic rams, each running at 250psi. This should allow Wedge Devo to comfortably flip up to 1 tonne.
SRIMECH- The flipper can right the machine easily and the rear wedge should hopefully prevent a Chaos-style self-flip. Also, Wedge Devo is equipped with a grey semi-sphere on either side of robot to prevent it getting stuck on its side
NOTES- flashing red light on top of robot, flies Scotland flag
STRENGTHS- powerful flipper, fast, manoeuvrable, difficult to get underneath, tough armour, good traction
WEAKNESSES- could prove a bit tricky to control, limited CO2 (like all other flippers :P)

2. Killotine: EVO
SHAPE- compact box-wedge ala Storm 2, rounded back
COLOUR- red
WEIGHT- about 100kg
DIMENSIONS- 100cm X 70cm X 35cm
SPEED- 16mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at the front with spatula, 10mm at sides and back. Skirts at sides and back produce 0mm.
ARMOUR- 3.25mm Hardox
WHEELS- inside robot, 4WD
POWER- 2 X LEM-130s; 2 x 12v 3amp NiCad packs, giving 36v @ 12amp
WEAPONS- The main weapon is the large pneumatic axe, composed of 3.5mm hardox. It is very similar to that of Killerhurtz and operates with a rack-and-pinion system like Terrorhurtz. Running on 160psi, the axe runs off an 80mm X 20mm ram and stores its gas in a 2kg main bottle and 1kg buffertank. If anything goes wrong with the axe, Killotine can use its great pushing power to simply ram its opponents to death.
SRIMECH- The axe. Even if it€™s already been fired while flipped, the axe can right itself ala Killerhurtz. Also, just like the original Killotine, the machine has a rounded back and a red semi-sphere on either side of robot to stop it getting beached.
NOTES- flies the Scotland flag, thanks to Tom, Aaron & AJ for helping with the design
STRENGTHS- Fast, dangerous weapon, good amount of traction, difficult to get under, quick srimech, nice and fast
WEAKNESSES- so-so turning, limited gas supply

3. Metal Sonic Spin Dash
SHAPE- low skirted box, with fixed front wedge & sloped sides
COLOUR- blue bodywork, with red-and-white striped skirting
WEIGHT- about 100kg
DIMENSIONS- 102cm X 75cm X 20cm
SPEED- 16mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at front with spatula, 0mm elsewhere with skirts, 12mm elsewhere without skirts
ARMOUR- 3.75mm Hardox
WHEELS- inside robot, 6WD
POWER- 2 x LEM-130s. Runs at 36v and produces approximately 18hp.
WEAPONS- The main weapon here is really the excellent traction, but like all its other incarnations, Spin Dash still maintains its Pussycat-style vertical circular saw. The saw is powered by an S28-150 MagMotor and runs at 3000rpm. This time, however, the four-clawed spinner sticks halfway out of the front wedge, so that when the wedge/spatula combo bashes underneath an opponent, both the wheels and the underbelly are at the mercy of the saw.
Also features several Mute-style barbs on top to hook onto other robots and let me drag them around the ring
SRIMECH- a rear-hinged arm on top. Powered by an S28-400 MagMotor geared 250:1 for quick and easy self-righting.
NOTES- flies the Scotland flag, thanks to AJ, has F*** Shadow! written on the underbelly in red
STRENGTHS- excellent traction, fast, manoueverable, tough armour, well-skirted, great at getting under everyone else
WEAKNESSES- so-so turning ability

http://img77.imageshack.us/img77/3603/fifthspindashde6.pnghttp://img77.imageshack.us/img77/360...pindashde6.png

4. Whirligig 4.5 (sort of formerly Whirligig 4.0)
SHAPE- flat disc
COLOUR- gold with Mauler-style scary face on top. The face shows the direction of the robot.
WEIGHT- about 100kg (see bottom)
DIMENSIONS- 101.6cm diameter X 12.7cm
SPEED- 15mph
TURNING CIRCLE- 0
GROUND CLEARANCE- 8mm
ARMOUR- 1.905 cm thick Grade 5 titanium
FEET- inside robot, uses 4 DrillZilla-style shuffling plates. These help prevent the bot being flung halfway across the ring on contact with another bot, ala Typhoon
POWER- 2 X S28-400s running on 36v. Uses 120 X NiCad cells at 36v, producing 12amps at 36v overall for drive and weapon power
WEAPONS- The main weapon on Whirligig is the spinning outer ring, fitted with 9 x Pussycat-style claws. The spinner is powered by an LEM-130 running at 36v. It can reach speeds of 1000rpm and produce up to 100kJ...more than enough to kill another bot at full speed.
As well as this, the power in the shuffling feet mean that Whirly can act as a pretty powerful pusher if the shell fails to work
SRIMECH- the robot is invertible and the blades prevent Whirly landing on his side
NOTES- flies Scotland flag, thanks to AJ, my first properly calculated machine
STRENGTHS- fast, manoeuvrable, very deadly weaponry, tough armour, scary face shows its direction, very good traction, cant be flung away on impact as easily as Typhoon
WEAKNESSES- so-so manoeuvrability, feet may prove vulnerable to crushers and axes

WEIGHT CHECK:
armour = 33.72kg (inc blades)
chassis, mounts, bracing etc = about 30kg
drive and weapon motors = 12kg overall
NiCads = about 15kg
feet = about 10kg overall

TOTAL WEIGHT = 100.72kg. Fits right into the roller limit, with the 1% error margin rule. Probably.

http://img137.imageshack.us/img137/1297/whirligig45xt7.pnghttp://img137.imageshack.us/img137/1...ligig45xt7.png

5. E Clawdius Unum (formerly Clawdius Decimus Murderous)
SHAPE- skirted wedge with small box section and rounded back
COLOUR- deep green with red shield emblazoned on the wedge, depicting a gold lion with a crown
WEIGHT- about 100kg
DIMENSIONS- 95cm X 70cm X 40cm
SPEED- 14mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at the front, 0mm at sides and rear thanks to skirts (arranged in a Biohazard fashion, corner-to-corner), 10mm without
ARMOUR- 4mm Hardox
WHEELS- inside robot, 4-wheel drive
POWER- 2 X S28-400 MagMotors
WEAPONS- The main weapon, as ever, is the hydraulic diamond-tipped crushing claw. It is powered by a Vivoil pump with an 80mm x 40mm ram, with a 2kg tank for storing the hydraulics. The claw runs at 3000psi and, aided by the diamond tip, should be able to leave plenty of holes in another robot.
The front wedge also features a Firestorm-style blade and two flat spears to aid in getting under the opposition. The wedge itself is now home to several Mute-style barbs to help ensnare other robots.
SRIMECH- A forward-hinged pneumatic arm on either side, powered by a pair of linear actuators. The rounded rear also prevents the robot getting beached.
NOTES- flies the Scotland flag, thanks to AJ, et tu, Brute? written on the underbelly
STRENGTHS- Quite nippy, good traction, powerful weapon, difficult to get underneath, fairly quick srimech
WEAKNESSES- so-so manoeuvrability

http://img137.imageshack.us/img137/1801/eclawdiusunumor1.pnghttp://img137.imageshack.us/img137/1...iusunumor1.png

6. Turbo Tails
SHAPE- short box with front wedge, sloped sides & rounded rear
COLOUR- yellow with the foxs face looking particularly evil on the front slope
WEIGHT- approx 100kg
DIMENSIONS- 100cm X 75cm X 25cm
SPEED- 16mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- approx 0mm at front (titanium blade), 8mm everywhere else
ARMOUR- 3.5mm monocoque Hardox, with 2mm yellow fur over that.
MOVEMENT- 4 inner wheels
POWER- 2 x C40-500 MagMotors. Can produce approximately 12hp.
WEAPONS- Tails chief weapon is the horizontal spinning blade. Now mounted on top, its a bit heavier than before and has Fluffy-style heads instead of the old hammers. Its powered by an LEM-130 running at 36v and has top speeds of around 2500rpm, so its definately just as deadly as before - if not, more so!
The front wedge also hosts a forward-hinged flipping arm, powered by an 80mm x 20mm full-pressure CO2 ram. The arm operates at 750psi, giving it a fair bit of oomph, and stores its gas in a 2kg main bottle. Capable of just over 30 fires per fight.
SRIMECH- The flipper. Sloped sides and rounded rear also prevent it getting beached.
NOTES- flies the Scotland flag, thanks to AJ
STRENGTHS- weapons synergy, touger armour, fast, fairly compact, greater pushing power
WEAKNESSES- not quite as manouverable as before, flammability, wholl take it seriously?

http://img84.imageshack.us/img84/7952/turbotailslongered5.pnghttp://img84.imageshack.us/img84/795...slongered5.png

7. All Scoop and No Stab Make Steve a Dull Boy
SHAPE- reverse wedge with scooped front, sloped sides and slightly boxed back
COLOUR- blue
WEIGHT- about 100kg
DIMENSIONS- 110cm X 75cm X 45cm
SPEED- 14mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at front, 10mm at sides n rear without skirting, virtually 0mm with skirting
ARMOUR- 3.5mm monocoque Hardox all over
WHEELS- inside robot, 4WD
POWER- 2 x C40-500 MagMotors. These will run at 36v and produce approximately 12hp.
WEAPONS- The weapon synergy you know and love is back. The main form of attack this time, however, is the large flipping scoop at the front. This is powered by 2 x 39mm Dia high-pressure rams, giving flipping power equal to that of Mute. OOTAs galore!
This is accompanied by the ol pneumatic axe, forward-facing and mounted on the scoop mechanism ala Behemoth...except it aint pneumatic no more! A bit smaller than previous versions, the hammer is powered by a 36v LEM-130, providing about 2kJ per whack and almost infinite blows. No bad, eh?
SRIMECH- the scoop can easily right the robot (hopefully, the axe can, too). Also, a single spike on either side will hopefully prevent it getting beached
NOTES- flies the Scotland flag, scoop and hammer can be activated together or separately
STRENGTHS- Weapon synergy, tough armour, very good traction, nippy, skirted
WEAKNESSES- So-so manouverability?

http://img233.imageshack.us/img233/3112/allscoopnostabmakestevexh3.pnghttp://img233.imageshack.us/img233/3...kestevexh3.png

8. The Botles Reunited
IS A 4-WAY CLUSTERBOT!
SHAPE- all parts are boxes with hinged skirts at the sides and rear (John€™s are shaped slightly differently, so they don€™t interfere with the weaponry)
COLOUR- John €˜Geddon (B1) = yellow with pink skirts and weaponry
Paul McHurtney (B2) = blue with grey skirts and scoop
George Harassment (B3) = red with light grey skirts and weapon
Ringo Scarr (B4) = pink with gold skirts
WEIGHT- round about 25kg each
DIMENSIONS- about 60cm X 40cm X 22cm each
SPEED- 12mph
TURNING CIRCLE- 0
GROUND CLEARANCE- 6mm all over each (minus skirts), 0mm at sides and back each (with skirts) (John€™s are shaped a slightly different way, so when they flop over, they don€™t interfere with the axes)
ARMOUR- 4mm aluminium
WHEELS- inside robot, 4 wheel drive
POWER- 2 X S28-150s each
WEAPONS- For this incarnation, John has kept his front hinged wedge (giving him virtually 0mm at the front), but this time, he has a pair of Splinter-style side axes for grabbing and penetrating opponents...he€™s €œreally got a hold on me€
Paul has also kept very similar to his last incarnation. The front static scoop remains (giving virtually 0mm at the front), but also included is a pneumatic spike hidden in the bucket - partly for damaging underbellys and armour, partly for sending other bots €œflying€
George is probably the most drastically altered of the Fab 4. Only 2 of his front spikes remain from his last appearance. All the rest have been ditched to make way for a horizontal spinning blade with two hammerheads stuck on for good measure. Beware of €œMaxwell€™s silver hammer€
And last, but by no means least, there€™s Ringo! Unlike the others, Ringo is nearly completely the same as before. The main weapon remains the small front vertical drum. It€™s essentially a scaled-down version of Tornado€™s and travels at approximately 2000rpm. Our €œhard-nosed drum-er€ is definitely back
SRIMECH- all parts are invertible and the skirts prevent any member getting beached on his side
NOTES- fly Scotland flags, the colour scheme comes from the Beatle€™s outfits on the cover for Sgt Pepper€™s Lonely Hearts Club Band
STRENGTHS- multiple parts, each part is fast and quite manoeuvrable, much improved weaponry, tricky to get under, pretty good traction for lightweights
WEAKNESSES- weak armour, each segment is very light

http://img155.imageshack.us/img155/5399/thebotlesreunitedzi7.pnghttp://img155.imageshack.us/img155/5...eunitedzi7.png

As for my featherweight and middleweight:

T.R.E.D.T.H.A.L. (FW)
SHAPE- low box with sloped sides and rear and little Panic Attack-style skirts at the sides and back
COLOUR- light green, with purple lifter, angry gaping mouth behind the lifter and evil goggly eyes on either side of the axe
WEIGHT- about 18kg (extra weight advantage for my method of movement )
DIMENSIONS- 70cm X 50cm X 25cm
SPEED- 15mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm for the front weapon, nearly 0mm at the sides and rear with skirts, about 5mm all round minus the skirts
ARMOUR- 3mm titanium monocoque body
MOBILITY- 2 X little inner tracks, similar in design to 101
POWER- 2 X 12v drills on 24v. The motors run off 2 X 24v 3amp packs, giving 24v at 6amps
WEAPONS- TREDTHAL uses two different weapons: the first is a lifter which is very similar to Atomic (the S5 version. Not the S7 one with the taller blade), but has a Bigger Brother-style spatula to aid in slipping under other robots. The arm is electrically powered and should tip a fellow FW over quite comfortably. The other weapon on top of the bot is a 180 degree forward-facing pneumatic axe, similar to Killerhurtz. The axe sits between the two arms of the lifter and the idea is that the weapons can work seperately or can be used together to become a lifter/clamper (ala Complete Control or Behemoth)
SRIMECH- Either weapon can quite easily self-right the robot, but the axe will be used most often, as it is much faster than using the lifter . Also, the wedges prevent the bot getting beached on its side
NOTES- flies the Scotland flag, the name stands for Tracked Robot Especially Designed To Hammer And Lift, thanks to Aaron for aiding the design
STRENGTHS- powerful weaponry, effective lifter/clamper system, quite tough armour, nippy, hard to get underneath, decent traction
WEAKNESSES- lifter slow at self-righting
PICCY HERE- http://img245.imageshack.us/img245/5708/tredthaltm3.pnghttp://img245.imageshack.us/img245/5708/tredthaltm3.png

Killoteeny (MW)
SHAPE- compact box shape with a front Storm 2-style wedge and a rounded rear
COLOUR- red
WEIGHT- about 50kg
DIMENSIONS- 80cm X 60cm X 25cm
SPEED- about 16mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- virtually 0mm at the front, 5mm at sides and back without skirts, 0mm at sides and back with skirts
ARMOUR- 5mm polycarbonate
WHEELS- inside robot, 4WD
POWER- 2 X S28-150s, running at 24v
WEAPONS- The main weapon is the large 180 degree pneumatic axe, very similar to that of Killerhurtz, which operates ala a rack-and-pinion system like Terrorhurtz. Running on 160psi, it really packs more than a punch and can very easily self-right the machine.
Also, if anything should happen to the axe, then the robot can use the low wedge and great pushing power to resort to a Tornado-style tactic - ram to death!
SRIMECH- The axe. Even if it€™s already been fired while flipped, the axe can right itself ala Killerhurtz, aided by a rounded back. Also, the machine has a rounded back and a red semi-sphere on either side of robot to stop it landing on its side.
NOTES- flies the Scotland flag, thanks to Frank for aiding the design
STRENGTHS- Fast, dangerous weapon, good amount of traction, difficult to get under, quick srimech, quite good armour
WEAKNESSES- so-so turning

So, for the side-tournaments:
ANNIHILATOR - Whirligig 4.5
TAG TEAM - Wedge Devolution & Killotine: EVO
CHALLENGE BELT - E Clawdius Unum
FOOTBALL - All Scoop & No Stab Make Steve a Dull Boy
FEATHERWEIGHTS - T.R.E.D.T.H.A.L.
MIDDLEWEIGHTS - Killoteeny

If theres any places left, that is.

(Message edited by Steven_McG on March 30, 200

[kodster]

Hey, where are my tag-team? :sad: