Ready made robot shell

**psycho_fling** · 6th February 2008, 15:34

my sponsors have made a robot shell and put it on ebay link below (very reasonable) if the postage is a problem then if its ok with stedmark i can drop it off at an event

specs;
3mm mild steel
total weight 4.5kg
welded inside and out
100mm high
380mm long
255mm wide

http://cgi.ebay.co.uk/Robot-outer-shell-armour_W0QQitemZ120219187510QQihZ002QQcahttp://cgi.ebay.co.uk/Robot-outer-sh...10QQihZ002QQca tegoryZ294QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

happy bidding!

**john** · 6th February 2008, 17:09

get them to come fight it!

**dmac** · 6th February 2008, 17:57

It needs to be Gary proof!!!

**geeza** · 6th February 2008, 19:44

3mm mild, I dont think so. 5 or 6mm hardox might just do the trick thou.

**grant_ploughbot** · 6th February 2008, 19:50

To be honest - you would probably be more than fine with 3mm anyway - spinners might tear bits off - but wont go in deep enough to get the juicy bits.

**typhoon_driver** · 6th February 2008, 22:49

I dont need to get into the juicy bits

**dmac** · 7th February 2008, 06:22

Is there an option to fit Wings, for Gary,s flying lessons.

**widow_twanky** · 7th February 2008, 21:43

I am looking at this and wondering if there is enough space inside for some motors, batteries and after a bit of modification a pneumatic flipper.

Obviously, it depends how you build it but anyone got any comments?

Andy